Différences

Ci-dessous, les différences entre deux révisions de la page.

--- modbo750manual [19/05/2020 00:49] – créée wikiadmin
+++ modbo750manual [19/05/2020 00:49] (Version actuelle) – wikiadmin
@@ Ligne 1: / Ligne 1: @@
+<code>
+----------------------------------------------
+MAIN FEATURES
+----------------------------------------------
+Fully compatible with ps2 v3-v16 PAL/USA/Jap.
+Support new versino GH-051-02 and GH-051-51.
+Upgrade from modbo3.0, comes with the original 100% v1.82 firmware, but it isn't upgradeable.
+Comes with a mini size board,and the wiring point order is good for installation.
+AUTOMATIC SELECTION for PS2/PS1/DVD SUPPORTS.
+DVD Region Free Incorporated !!
+Software selectable "PS2 Quick Load" option. (To skip PS2 logo and Quick boot PS2 Games!!)
+Software selectable "PSX Quick Load" option. (To skip PS1 logo and Quick boot PSX Games!!)
+Easy to Install. (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13)
+CPLD Chip (3.3V power supply) based IC for enhanced stability
+AUTOMATIC "MACROVISION=OFF" ON ALL PS2 FROM V3 TO V16 WITHOUT ADDITIONAL WIRES !!
+AUTOMATIC "GREEN FIX" (No more need to change the cable to see your DVD movies on the PS2!!)
+Import Games Fix (All PSX import games are played at FULL SCREEN and FULL COLOR !!)
+STEALTH-Mode (The Modchip can be switched off and becomes invisible to Online Gaming)
+Sleep-Mode (The Modchip will switch off itself after boot)
+Supports DVD-9 games!!
+PLAYS ALL THE CD’S and DVD’S Games (both, Import or Backup’s)
+SUPPORTS MULTI-DISK GAMES !!
+SUPPORTS ANTI-MOD PS1 GAMES !! (Only for V9 - V16 PS2)
+Very Reliable (All the Modchips are 100% tested before delivery)
+Very Stable (Thanks to the sleep mode the IC will never Overheat)
+CD Lens Safe (Avoid CD lens damage by sending un-necessary signal to the Drive Controller)
+Support dev1 and dev2 for memorycard booting!
+----------------------------------------------
+NEW FUNCTION
+----------------------------------------------
+Press TRIANGLE + CIRCLE to enter the configuration menu.
+PS2 SCREEN FIX : OFF : Disables PS2 video fix.
+COLOR : Games will be output on their original video mode (PAL/NTSC)
+with color correction applied to match your PS2 region.
+PAL : Force video mode to PAL
+NTSC : Force video mode to NTSC
+PAL60 : Force all games to NTSC with color correction.
+Games will run faster but screen might need adjusting.
+Y SCREEN FIX : OFF : Y screen position fix is disabled.
+AUTO : Y position fix enabled with default settings.
+Should be fine for most television sets.
++/- N : Fine tune Y position.
+Positive values move the screen down, Negative values move it up.
+PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix
+PSX MULTI DISK : ON/OFF : Enable/Disable PSX multi disk support
+MC16 PATCH : ON/OFF : Enable/Disable D4TEL memory card support
+ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch
+MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch
+GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies
+DVD VIDEO REGION : 1..8 : Selects the DVD player region.
+Use it to match the corresponding region on RCE protected discs.
+DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch
+BOOT MODE : AUTO : Normal behaviour. All discs wil autoboot.
+FAST : FastBoot.
+Same as pressing SELECT on boot.
+INFMAN : Execute Infinity Manager on mc0:
+Same as Pressing TRIANGLE on boot.
+DEV1 : Execute BOOT.ELF on mc0:
+Same as Pressing R1 on boot.
+DEV2 : Execute BOOT.ELF on HDD
+Same as Pressing L1 on boot.
+DVDV : Force DVD video mode.
+Same as Pressing CIRCLE on boot.
+PAD DETECT TIME : 2..10 : Select time to wait for connected pad on boot.
+Only useful if pad is left unconnected.
+BOOT LOGO : ON/OFF : Enable/Disable Matrix boot logo.
+DEFAULT LANGUAGE : LANG : Default language to use for FastBoot/InfMan/Dev1 mode.
+------------------------------------
+STANDARD OPERATION FOR THE modbo 750:
+------------------------------------
+BOOT OF PS2 / PS1 / DVD MOVIES:
+-------------------------------
+- Insert the disc inside the PS2.
+- The infinity will recognize the kind of disc you inserted and select
+the appropriate boot system.
+TURNING OFF THE INFINITY:
+-------------------------
+- Press START on joypad 1 until the writing "DISABLED" will appear on screen.
+- Press reset once.
+- The Infinity is now disabled until PS2 is turned off to Standby Position.
+FAST BOOT OF PS2 GAMES:
+-----------------------
+- Press SELECT on joypad 1.
+- PS2 Logo will be skipped and game will boot directly.
+FORCING PS1/DVD MODE:
+---------------------
+- Press CIRCLE on joypad 1.
+(This option is only needed just in case someone needs to force the PS2
+to boot in PS1/DVD mode).
+FORCING AUTO MODE:
+---------------------
+- Press CROSS on joypad 1.
+Useful to temporarily skip the default boot mode when set to something
+other than AUTO.
+LAUNCHING MEMORY CARD APPLICATIONS:
+-----------------------------------
+- Press TRIANGLE on joypad 1.
+- If installed, the Infinity Manager will appear and show a list of
+installed applications.
+-or-
+- Press R1 on joypad 1.
+- If installed, the default boot application (mc0:BOOT/BOOT.ELF) will
+be launched.
+LAUNCHING HDD APPLICATION (DEV2 MODE):
+--------------------------------------
+- Press L1 on joypad 1.
+- If correctly installed, the default application will be executed from the HDD.
+</code>