=====Zwave & Zigbee USB dongles to Hassio VM=====
  * [[https://github.com/custom-components/remote_homeassistant | Remote Home-Assistant]]
  * [[https://github.com/AverageJoe89/hassio-usbip-mounter | Home Assistant Add-on: USBIP Mounter]]
  * [[https://fleetstack.io/blog/how-to-setup-a-raspberry-pi-as-a-usb-over-ip-server-a-comprehensive-guide | How to Setup a Raspberry Pi as a USB-over-IP Server]]
  * [[https://github.com/vladbabii/homeassistant-socat | Home Assistant with socat for remote zwave]]
  * [[https://community.openhab.org/t/share-z-wave-dongle-over-ip-usb-over-ip-using-ser2net-socat-guide/34895 | Share Z-wave dongle over IP (USB over IP using ser2net / socat ) guide]]
  * [[https://community.home-assistant.io/t/rpi-as-z-wave-zigbee-over-ip-server-for-hass/23006 | RPi as Z-Wave/ZigBee-over-IP server for Hass]]

=====Zigbee2MQTT=====
  * [[https://www.zigbee2mqtt.io/information/zigbee_network.html | Comment fonctionne un réseau ZigBee]]
  * [[https://www.zigbee2mqtt.io/information/flashing_the_cc2531.html | Flashing the CC2531]]
  * Coordinator (connecté en USB au serveur HomeAssistant)
    * [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator | ZigBee coordinator firmware]]
      * Choisir le firmware **Z-Stack_Home_1.2 (source_routing)**
      * Ajouter des [[https://github.com/Koenkk/Z-Stack-firmware/tree/master/router/Z-Stack_Home_1.2 | routeurs]] pour dépasser les 5 devices
  * [[https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html | CC2530 as ZigBee Router]]
  * [[https://www.thingiverse.com/thing:3416548 | Zigbee CC2530 + CC2591 Case]]

=====Home Assistant=====
  * [[https://forum.hacf.fr/t/acces-de-l-exterieur-en-https-avec-nginx-proxy-manager/1761|NGINX proxy]]
  * [[CompilerGeckodriver | Compiler Geckodriver pour l'add-on Gazpar]]
  * [[https://www.lesalexiens.fr/domotique/home-assistant-alexa/tutoriel-piloter-home-assistant-a-la-voix-grace-a-alexa/ | Piloter Home Assistant à la voix grâce à Alexa]]
  * [[http://sarakha63-domotique.fr/reverse-proxy-sur-nas-synology-ssl/ | Reverse Proxy sur Nas Synology et SSL]]
  * [[https://community.home-assistant.io/t/setting-scenes-on-z-wave-wall-switch-zhc5010/3847/7 | Setting scenes on Z-Wave Wall Switch ZHC5010]]
  * [[https://community.home-assistant.io/t/broadlink-manager-nicer-way-to-learn-and-send-ir-rf-commands/58770 | Broadlink Manager - Nicer way to Learn and Send IR/RF commands]]
  * [[https://projetsdiy.fr/test-du-pont-zigbee2mqtt-hack-gateway-xiaomi-smart-home-aqara-partie-1-assemblage-systeme-dalarme-en-5-avec-node-red/ | Assembler le pont Zigbee2MQTT]]

=====Raspberry Pi=====
  * Identifier la [[https://www.element14.com/community/docs/DOC-78141/l/identifying-your-model-of-raspberry-pi | version de son Raspberry]]
  * Augmenter le courant disponible sur les 4 ports USB (à partir du Raspberry Pi 2)
    * Par défaut 600mA répartis sur les 4 ports USB
    * Pour passer à 1.2A, il faut ajouter le paramètre ''max_usb_current=1'' au fichier ''/boot/config.txt''
  * [[https://www.amazon.fr/Gazechimp-Module-Relais-Shield-Raspberry/dp/B073367N1Z/ref=sr_1_2?ie=UTF8&qid=1526499889&sr=8-2&keywords=raspberry+pi++relais | Gazechimp Module de Relais Shield 4 Canaux]] 
    * Hassio : GPIO 4, 22, 6 et 26 ([[http://wiki.keyestudio.com/index.php/KS0212_keyestudio_RPI_4-channel_Relay_Shield | wiki]])
    * Octoprint : GPIO 7, 3, 22, 25
  * Créer sa [[http://blog.idleman.fr/billet-invite-creer-une-seedbox-securisee-avec-le-raspberry-pi/ | Seedbox]] sur Raspberry Pi
  * [[FixBluetooth | Dépanner le Bluetooth]]
  * [[ConcertBoy | Pi Zero W avec Volumio 2 et connexion BT]]