Différences

Ci-dessous, les différences entre deux révisions de la page.

--- autodeskfusion360 [04/01/2021 09:56] – créée wikiadmin
+++ autodeskfusion360 [04/01/2021 10:00] (Version actuelle) – [Importer un fichier STL] wikiadmin
@@ Ligne 1: / Ligne 1: @@
+=====Retoucher des fichiers STL=====
+====Importer un fichier STL====
+  * [[https://www.youtube.com/watch?v=Ejty2Ljwl6g | Vidéo en français ]]
+  * [[https://toglefritz.com/convert-a-simple-stl-into-a-body-in-fusion-360/ | Convert a Simple STL into a Body in Fusion 360]]
+  * [[http://toglefritz.com/convert-a-complex-stl-into-a-body-in-fusion-360/ | Convert a Complex STL into a Body in Fusion 360]]
+  * MODEL
+    * Insert Mesh
+    * Do not capture Design History
+  * PATCH
+    * MODIFY / Mesh / Mesh to BRep
+  * MODEL
+    * Capture Design History
+====Fusionner des surfaces coplanaires====
+Import the STL, Open the imported file (be sure you are not capturing design history at this point), Mesh to Brep, click on PATCH workspace -> Modify -> Merge, select coplanar faces and merge.
+This of course has its limitations. Mainly being it will only work for coplanar faces. If there is a segmented curve it will stay segmented.
+http://autode.sk/2nTHRXM