[Home Assistant] Détecteur de mouvement FIBARO

 

Après avoir inclu le capteur à son réseau zwave sous Home Assistant, on a accès à plusieurs nouveaux capteurs :

binary_sensor.fibaro_system_fgms001_motion_sensor_sensor_89_0
sensor.fibaro_system_fgms001_motion_sensor_alarm_level_89_1
sensor.fibaro_system_fgms001_motion_sensor_alarm_type_89_0
sensor.fibaro_system_fgms001_motion_sensor_burglar_89_10
sensor.fibaro_system_fgms001_motion_sensor_general_89_0
sensor.fibaro_system_fgms001_motion_sensor_luminance_89_3
sensor.fibaro_system_fgms001_motion_sensor_seismic_intensity_89_25
sensor.fibaro_system_fgms001_motion_sensor_sourcenodeid_89_2
sensor.fibaro_system_fgms001_motion_sensor_temperature_89_1

On peut utiliser le capteur de mouvement de la manière suivante :

  - alias: "Fan on"
    trigger:
    - platform: state
      entity_id: binary_sensor.fibaro_system_fgms001zw5_motion_sensor
      to: 'on'

ou aussi :

alias: Unexpected motion
trigger:
  platform: state
  entity_id: sensor.fibaro_system_fgms001_motion_sensor_burglar_33
state: '8’
condition:
…
action:
…
automation:
- alias: Turn on kitchen light when there is movement
  trigger:
    platform: state
    entity_id: sensor.motion_sensor
    to: 'on'
  action:
    service: homeassistant.turn_on
    entity_id: light.kitchen_light

- alias: Turn off kitchen light 10 minutes after last movement
  trigger:
    platform: state
    entity_id: sensor.motion_sensor
    to: 'off'
    for:
      minutes: 10
  action:
    service: homeassistant.turn_off
    entity_id: light.kitchen_light